缓存调制波熔铝炉石墨坩埚特别注意事项：

1注意不要给予机械性外力撞击，不要从高处落下或撞击；

2不要被水淋湿，需存放于干燥的地方；

3筑熔干燥后，不要使其接触水；

4停炉后剩余之铝，铜料要尽量取出，坩埚内不要留残液；

5酸化物（除渣剂等）之使用需适量，以免侵蚀坩埚，过量使用会寝室坩埚造成破裂；

6投入原料时不撞击坩埚，不使用机械力量。

8.2保存及搬运

8.2.1石墨坩埚怕水，绝对要避免潮湿及被水淋到；

8.2.2留意表面碰伤，勿直接把坩埚放于地板上；

8.2.2勿在地板上横向滚动，立向在地上推转时地上需垫厚纸板或破布等较软的东西，以免碰伤磨伤底部；

8.2.3搬运时请特别注意，切勿落地或碰击到；

https://songdaokeji.cn/category/products/induction-melting-furnace

https://songdaokeji.cn/category/blog/induction-melting-furnace-related-information

firstfurnace@gmil.com

Telephone：8618037961302

Special precautions for the graphite crucible of the buffer modulated wave melting aluminum furnace:

1 Be careful not to give mechanical impacts, do not fall from a high place or hit;

2 Don't get wet by water, store in a dry place;

3 After the building is melted and dried, do not expose it to water;

4 After stopping the furnace, the aluminum and copper materials should be removed as much as possible, and no residual liquid should be left in the crucible;

5 The use of acid compound (slag remover, etc.) needs to be appropriate to avoid corroding the crucible. Excessive use will cause the crucible in the bedroom to crack;

6 Do not hit the crucible when putting in the raw materials, and do not use mechanical force.

8.2 Storage and handling

8.2.1 The graphite crucible is afraid of water, so it is absolutely necessary to avoid moisture and being drenched by water;

8.2.2 Pay attention to scratches on the surface, and do not put the crucible directly on the floor;

8.2.2 Do not roll horizontally on the floor. When pushing and turning on the ground, you need to pad soft things such as thick cardboard or rags on the ground to avoid scratching the bottom;

8.2.3 Please pay special attention when transporting, do not drop or hit;