本文为技术资料或者文章来自网络，仅供参考学习，如涉嫌侵权，请告知删除

    300KW中频感应加热设备 用途 1、用于直径70以下圆钢、棒料等工件透热锻造，每小时产量750kg。 2、轴可淬到Φ250mm以下轴类淬火。 3、齿轮可淬到Φ550mm以下齿轮淬火，套筒滚子链轮可淬到Φ900mm，模数50以下齿轮可单齿淬火。 300KW中频感应加热设备应用领域： 1、透热锻造直径70mm以下圆钢棒料透热锻造，每小时产量750kg。 2、轴可淬到Φ250mm以下轴类淬火。 3、齿轮可淬到Φ550mm以下齿轮淬火，套筒滚子链轮可淬到Φ900mm，模数50以下齿轮可单齿淬火。 4、大型机床导轨淬火。 5、淬硬层达到材质要求，淬深2-6mm。 主要特点： 1、采用IGBT器件、元器件全球采购。 2、采用高效率组合谐振技术。 3、采用低电感电路安排、大规模数字电路。 4、采用更全面、成熟的保护技术。 配置标准： 1、中频感应加热设备一台 2、炉膛一套 3、全自动气动送料机一台 4、闭式冷却塔 5、红外测温仪 300KW medium frequency induction heating equipment use 1. It is used for diathermy forging of round steel, bars and other workpieces with a diameter of less than 70, with an output of 750kg per hour. 2. The shaft can be quenched to shafts below Φ250mm. 3. The gear can be quenched to Φ550mm or less, the sleeve roller sprocket can be quenched to Φ900mm, and the gear with a modulus of 50 or less can be single-tooth quenched. Application fields of 300KW medium frequency induction heating equipment: 1. Diathermic forging round steel bars with a diameter of less than 70mm by diathermic forging, with an output of 750kg per hour. 2. The shaft can be quenched to shafts below Φ250mm. 3. The gear can be quenched to Φ550mm or less, the sleeve roller sprocket can be quenched to Φ900mm, and the gear with a modulus of 50 or less can be single-tooth quenched. 4. Quenching of large machine tool rails. 5. The hardened layer meets the material requirements, and the hardening depth is 2-6mm. main feature: 1. Adopt global procurement of IGBT devices and components. 2. Adopt high-efficiency combined resonance technology. 3. Adopt low-inductance circuit arrangement and large-scale digital circuit. 4. Adopt more comprehensive and mature protection technology. Configuration standard: 1. One medium frequency induction heating equipment 2. A set of furnace 3. One automatic pneumatic feeder 4. Closed cooling tower 5. Infrared thermometer