水平分型热芯盒双射头射芯机

型号	模具尺寸mm	模板距离mm	射口中心到模脚距离	合模行程mm	砂芯重量kg	砂斗容积kg	驱动类型	系统压力kgf	锁模力kgf	锁模缸径mm	加热功率kw	自动接芯
ZRS-PC500-2-1	500*550	200-600	80-280	400	20	200x2	气动	6	1600	160	16.5	选装
ZRS-PC600-2-1	600*650	200-600	80-300	400	25	250x2	气动	6	2500	200	21x2	选装
ZRS-PC700-2-1	700*750	250-750	80-300	500	30	300x2	气动	6	2500	200	21x2	选装
ZRS-PC800-2-1	800*850	250-850	80-350	600	35	350x2	可选	6	可选	可选	25x2	选装
ZRS-PC900-2-1	900x950	250-850	80-350	600	40	400x2	可选	6	可选	可选	25x2	选装

1：工位：1单工位，2双工位，5单工位下移动模具

三结构

1：本机由机身，储沙室，射沙桶，上模板，下模板，抽芯控制,电脑控制器,加热电路,以及气动管路系统组成。

2：机身由坚固的钢结构框架，上部支撑储沙室，下部是容模机构，机身内部设有一个储气罐,控制阀安装室和电控柜。 3：射沙机构采用数字时间控制，射沙时间和压力可以调整。

4：气动控制管路系统采用标准电控电磁阀，并选用24V安全电压,气源浪费少，控制效果好，降低故障率。

四吊运安装和调整

1：设备在吊装时应吊在机头挂钩上或者均匀吊在机身底座四点，确保安全后再施工。

2：设备放置到工作场地后应该保证工作台面水平度，不应超过1/1000

Horizontal type hot core box double shot core shooting machine

Model ZRS-PC700-2-1

1. purpose

This machine is suitable for mass production of small and medium-sized castings. It is made of micro-computer digital control. The process parameters are digitalized and automated, the use efficiency is improved, and the product quality is stable . Can play the purpose of improving quality and output. The design of the whole machine is reasonable, the function is complete, and the use is flexible and convenient.

2. main specifications

ZRS-PC700-2-1

Model Description: specification for type

Z: Foundry industry code

R: hot box / L: cold box

S: horizontal typing / C: vertical typing

PC: Automatically bring computer empty: manual without computer

700 : main size: 600 , 700,800,900 , customized

number of shots

model	Mold sizemm	Template distancemm	Shot center to die distance	Molding strokemm	Sand core weightkg	Sand bucket volumekg	Drive type	System pressurekgf	Clamping force kgf	Clamping cylinder diametermm	Heating powerkw	Automatic core
ZRS-PC500-2-1	500*550	200-600	80-280	400	20	200x2	pneumatic	6	1600	160	16.5	Optional
ZRS-PC600-2-1	600*650	200-600	80-300	400	25	250x2	pneumatic	6	2500	200	21x2	Optional
ZRS-PC700-2-1	700*750	250-750	80-300	500	30	300x2	pneumatic	6	2500	200	21x2	Optional
ZRS-PC800-2-1	800*850	250-850	80-350	600	35	350x2	Optional	6	Optional	Optional	25x2	Optional
ZRS-PC900-2-1	900x950	250-850	80-350	600	40	400x2	Optional	6	Optional	Optional	25x2	Optional

Work station: 1 single station, 2 double stations, 5 single station moving mold

3. structure

1 : This machine consists of the fuselage, sand storage room, sanding bucket, upper template, lower template, core control , computer controller , heating circuit , and pneumatic piping system.

2 : The fuselage consists of a solid steel frame, the upper part supports the sand storage room, and the lower part is a cavity-forming mechanism. The inside of the fuselage is provided with a gas storage tank , a control valve installation room and an electric control cabinet.

3 : The sand shooting mechanism adopts digital time control, and the time and pressure of shooting can be adjusted.

4 : Pneumatic control pipeline system adopts standard electronically controlled solenoid valve, and selects 24V safety voltage , which has less waste of gas source, good control effect and lower failure rate.

4. lifting installation and adjustment

1 : When lifting the equipment, it should be hung on the nose hook or evenly hang on the base of the fuselage at four points to ensure safety and then construction.

2 : After the equipment is placed on the work site, the level of the work surface should be guaranteed and should not exceed 1/1000.

http://www.yxdianlu.com/BdwlkjProduct.asp?id=409

http://www.firstfurnace.com/BdwlkjProduct.asp?id=425