洛阳松导感应加热科技有限公司
联系方式:15038554363
24小时技术热线:15038554363
邮 箱:1390003299@qq.com
厂址:河南省洛阳市洛新工业园区
名称:300KW中频感应加热设备
价格:0
节能型 SD W-300KW 中频感应加热设备主要用于:
1. 直径80mm 以下的圆钢,方钢,棒等工件的加热锻造 ;
2. 齿轮直径约750mm的 淬火 ;
3 , 链轮淬火直径900mm ,单齿淬火模量约 50mm ,轴淬火直径约 300 ,淬火均匀,效果好。
设备优势:
1 , IGBT 逆变技术及串联谐振电路;
2 ,频率范围宽,从 1KHz-8KHz ,可以根据特定加热工件的加热深度进行匹配,适应范围大;
3 ,采用智能变频器控制技术,全软下一页:
主要特征:
1 , IGBT 逆变技术及串联谐振电路;
2 ,频率范围宽,从 1KHz-8KHz ,可以根据特定加热工件的加热深度进行匹配,适应范围大;
3, 采用智能变频器控制技术,全软开关精密控制,设备运行可靠性高,维护率低;
4 ,高效节能,比晶闸管中频节能 10%-30% ,全功率范围内功率因数高,功率效率高;
5 , 100% 满负荷, 24 小时连续工作的能力;
6. 全面显示频率,功率,电压和电流;
7. 操作简单,安装简单,连接三相 380V 和冷却水。
Energy-saving SD W-300KW medium frequency induction heating equipment is mainly for:
1. Heating forging of round steel, square steel, bar and other workpieces with a diameter of 80mm or less ;
2. Quenching of gears with a diameter of about 750mm ;
3 , 900mm diameter sprocket quenching, single tooth quenchable modulus of about 50mm , diameter of about 300 shaft quenching, quenching uniform, good effect.
Equipment advantages :
1 , IGBT inverter technology and series resonant circuit;
2 , the frequency range is wide, from 1KHz-8KHz , can be matched according to the heating depth of the specific heating workpiece , the adaptation range is large;
3 , using intelligent inverter control technology, all soft Next:
main feature:
1 , IGBT inverter technology and series resonant circuit;
2 , the frequency range is wide, from 1KHz-8KHz , can be matched according to the heating depth of the specific heating workpiece , the adaptation range is large;
3. Adopt intelligent inverter control technology, full soft switch precision control, high reliability of equipment operation and low maintenance rate;
4 , high efficiency and energy saving, 10%-30% energy saving than thyristor medium frequency , high power factor and power efficiency in full power range;
5 , 100% full load, 24 hours continuous working capacity;
6. Full display of frequency, power, voltage and current;
7. Simple operation, simple installation, connect three-phase 380V and cooling water.