本文为技术资料或者文章来自网络，仅供参考学习，如涉嫌侵权，请告知删除

    中频炉漏炉怎么处理？ 如果出现漏炉现象。应立即切断电源，检查炉子四周是否有铁水漏出，如果有，立即倾炉，把铁液倒完，如果没有，则按照漏炉报警检查程序进行检查和修理，一般来说漏炉的话要在炉水倒完之后用感应炉捣打料重新筑炉， 中频炉一般用来熔化金属，中频炉漏炉会伴随金属液外流并接触到感应线圈，相当于炉内的金属液与感应线圈短路了，根据这一原理，可以在中频炉漏炉故障出现后实现报警。 How to deal with the leakage of induction melting furnace? If there is a furnace leakage phenomenon. The power supply should be cut off immediately and check whether there is molten iron leakage around the furnace. If so, dump the furnace immediately and pour out the molten iron. If not, check and repair according to the leakage alarm inspection procedure. Generally speaking, the furnace should be in the furnace. After the water is poured, use the ramming material of the induction furnace to rebuild the furnace, The induction melting furnace is generally used to melt metal. The leakage of the induction melting furnace will be accompanied by the outflow of molten metal and contact the induction coil, which is equivalent to the short circuit of the molten metal in the furnace and the induction coil. The alarm is realized after the fault occurs.