本文为技术资料或者文章来自网络，仅供参考学习，如涉嫌侵权，请告知删除

    感应加热炉的组成 感应加热炉是根据工艺要求设计制造的，按毛坯的形状与尺寸，质量，加热时间来确定感应加热炉的功率。 　 感应加热炉由感应器、进出料机构、炉架与冷却水系统等组成。感应器是感应加热炉的核心部分，根据毛坯的加热稳定与生产率来计算感应器的电参数，确定加热所需的功率与所选用的电压，确定感应线圈的几何尺寸与匝数，感应器安装在炉架上，应便于装卸与维修，进出料机构可以用手动、电动、气动或液压传动，视具体条件而定，冷却水系统包括进水与回水两部分，均装在炉架上成为一个整体。 　 控制和操作系统 　如进料时的节拍控制，冷却水温度的监测，被加热毛坯温度的测量，以及用电安全的保护等。 Composition of induction heating furnace The induction heating furnace is designed and manufactured according to the process requirements, and the power of the induction heating furnace is determined according to the shape, size, quality, and heating time of the blank. 　 The induction heating furnace is composed of an inductor, a feeding and discharging mechanism, a furnace frame, and a cooling water system. The inductor is the core part of the induction heating furnace. According to the heating stability and productivity of the blank, the electrical parameters of the inductor are calculated, the power required for heating and the selected voltage are determined, the geometrical size and number of turns of the induction coil, and the installation of the inductor On the furnace rack, it should be easy to load, unload and maintain. The feeding and discharging mechanism can be driven by manual, electric, pneumatic or hydraulic. A whole. 　 Control and operating system 　Such as tempo control during feeding, monitoring of cooling water temperature, temperature measurement of heated blanks, and protection of electrical safety, etc.