15 tons continuous casting and rolling production line

Equipment layout: The main rolling mill 400 × 3 three-roller blanking machine reciprocates three rough rollings and then enters the finishing mill to roll into the required finished products.

First, the intermediate frequency furnace

Project Description	Technical Parameters
Intermediate frequency power supply	KGPS-3500-0.5
Furnace body	GW-5T
transformer	ZS11-4000

Second, continuous casting machine

Project Description	Technical Parameters
Yield	About 15 tons / hour
Dimensions	20*6
Pusher	Hydraulic
Discharge method	Measuring material
radian	R 3 M 90

3, heating furnace

Project Description	Technical Parameters
Yield	About 5 tons / hour
power	2200KW
Discharge method	Hydraulic discharge

Fourth, the technical parameters of rolling equipment

Project Description	Technical Parameters
Yield	About 15 tons / hour
Configuration power	2800 KW/(380V/50HZ)
Rolling speed	10 M/S (opening machine), K1 final rolling line speed is about 8 M/S.
Rolling pressure	100 tons
Feeding section	90 * 90*220 0mm continuous casting billet
Rolling specification	¢ 10 - 18 mm rebar.
Transmission form	Direct drive

V. Equipment supply list:

1. φ 40 0x 3 three-roller blanking machine

Product name	Quantity
48 0 KW motor	1 set , voltage: 380V. Frequency: 50Hz.
48 0KW starter cabinet	1 set
Ф1 8 00mm flywheel group	1 set, material: cast steel.
ZD 6 0 reducer	1 set , A=600mm
300mm three-axis gearbox	1 set , A=300mm
Rolling mill stand (three rolls)	1 frame , material: cast steel.
Roller ¢ 420 /320×900mm	3, material; spheroidal infinite chill size; ¢ 360 / 320 × 900mm
Connecting shaft	3 pieces , material: alloy, size; SWC28 5×950mm
Nylon rod (gift)	3 pieces, material; nylon size; ¢ 60 × 1000mm

Φ 35 0 one to two continuous rolling mill ( 3 sets of 6 sets)

Product name	Quantity
400 KW motor	3 sets , voltage: 380V. Frequency: 50Hz.
400 KW starter cabinet	3 sets
One to two rolling distribution box	3 sets , A=1150mm
Rolling mill stand (two rolls)	6 frames , material: cast steel.
Roller ¢ 380 × 500mm	12 strips, material: low/medium nickel chrome molybdenum,
Connecting shaft	12 pieces, material: alloy, size; SWC 235×800mm
ZD 5 0 reducer	1 set , A=500mm
Nylon rod (gift)	3 pieces, material; nylon size; ¢ 50 × 1000mm

Φ 28 0 one-to-two continuous rolling mill ( 4 sets of 8 sets)

Product name	Quantity
280 KW motor	4 sets , voltage: 380V. Frequency: 50Hz.
280 KW starter cabinet	4 sets
One to two rolling distribution box	4 sets , A=1150mm
Rolling mill stand (two rolls)	8 frames , material: cast steel.
Roll ¢235/280×500mm	16 strips, material: low/medium nickel chrome molybdenum,
Connecting shaft	16 pieces, material: alloy, size; SWC 235×800mm
Nylon rod (gift)	4 pieces, material; nylon size; ¢ 50 × 1000mm

6, auxiliary equipment

Product name	Quantity model
Front roller table	1 set ( ¢ 250 × 750 × 6000mm )
Rear roller table	1 set ( ¢ 250 × 450 × 6000mm )
Pinch roller	1 set
Double shear
Swinging arrow
Step type cooling bed	1 set (40 x 4 meters)
Hydraulic metal shear	1 set of 100T
Roller	Conveying roller, lower cooling roller, shear roller (( 159 × 200mm ), ( ¢ 159 × 300mm )
Two-way baler